Bds Engineering
Bds Engineering
Govindpuri, New Delhi, Delhi
SEND SMS
SEND EMAIL

Submersible Pumps

Offering you a complete choice of products which include commerical sump pump, submersible dewatering pumps, submersible pump control panel, moplen submersible pumps, single vane submersible pumps and jet pump.

Commerical Sump Pump

Commerical Sump Pump
  • Commerical Sump Pump
Ask For Price

BLAIRS Commercial Sump Pump is designed to handle dirty water for pumping liquids containing suspended solids, including short fibers and sewage in domestic and civil applications. It is particularly recommended for the transfer of water mixed with mud in areas such as: domestic housing, industrial applications and underground car parks. in a purposely built pit with minimum dimensions 500x500x500 mm is recommended for fixed installations to give total drainage and to allow correct operation of the automatic float switch.

OPERATING LIMITS

  • Fluid temperature up to 50 °C
  • Maximum operating depth 5m below water level
  • Maximum passage for Grain size inlet Ø 30 mm
Request
Callback
Yes! I am Interested

Submersible Dewatering Pumps

Submersible Dewatering Pumps
  • Submersible Dewatering Pumps
Ask For Price

Submersible Pump Control Panel

Submersible Pump Control Panel
  • Submersible Pump Control Panel
Ask For Price

Moplen Submersible Pumps

Moplen Submersible Pumps
  • Moplen Submersible Pumps
Ask For Price
BLAIRS dirty Water Submersible pumps with open impeller are suitable to lift waste liquids even with suspended solids. Pumps have been developed with the most advanced and sophisticated engineering and it has the possibility to operate also if partially submerged. The total absence of screws and motor cover in stainless steel one of the most technological advanced pumps available in the market. Max. Free passage of Grain size up to Ø 30 mm.

PERFORMANCE RANGE
  • Flow rate up to 225 I/min.(13.5m3/h)
  • Head up to 8 m

OPERATING LIMITS
  • Fluid temperature up to 35°C
  • Maximum ambient temperature 40°C

STRUCTURAL CHARACTERISTICS
  • Pump body, Impeller: Moplen
  • Impeller: Noryl
  • Shaft with rotor: stainless steel Aisi 420A
  • Mechanical seal: carbon–ceramics.
  • Motor casing: stainless steel
  • Continuous duty.

MOTOR
  • Built-in overload motor protector with automatic reset
  • Permanent split capacitor
  • Protection IP 68
Request
Callback
Yes! I am Interested

Single Vane Submersible Pumps

Single Vane Submersible Pumps
  • Single Vane Submersible Pumps
Ask For Price
BLAIRS Single vane stainless steel submersible pump for professional use. particularly efficient and reliable in fixed installations with automatic operation with general motor specification and hard-faced mechanical seal. pump are highly efficiency pumps for professional use & built completely in stainless steel. They are extremely reliable and suitable for continuo's duty. Single vane impeller is mounted on the end of the drive shaft and enclosed in a large ring chamber framed by the pump body and the base. The suction opening is direct with the liquid to be pumped. The rotating impeller which is centrifuged in the ring chamber transmits kinetic energy to the water; kinetic energy is transformed into pressure energy. The particular shape of the impeller optimizes efficiency. Max. Free passage of Grain size up to Ø 50 mm.

APPLICATION
BLAIRS single vane submersible pump is designed to handle dirty water for pumping liquids containing suspended solids, including short fibers and sewage in domestic and civil applications. It is particularly recommended for the transfer of water mixed with mud in areas such as: domestic housing, industrial applications and underground car parks. in a purposely built pit with minimum dimensions 500x500x500 mm is recommended for fixed installations to give total drainage and to allow correct operation of the automatic float switch.

PERFORMANCE RANGE
  • Flow rate up to 500 I/min. (30m3/h)
  • Head up to 12 m

OPERATING LIMITS
  • Fluid temperature up to 50 °C
  • Maximum operating depth 5m below water level
  • Maximum passage for Grain size inlet Ø 30 mm

STRUCTURAL CHARACTERISTICS
  • Pump body: Stainless steel
  • Single vane Impeller: Stainless steel.
  • Motor sleeve: Stainless steel
  • Motor base: Stainless steel
  • Motor shaft: Stainless steel.
Request
Callback
Yes! I am Interested

Jet Pump

Jet Pump
  • Jet Pump
Ask For Price

Submersible Dewatering Pump

Submersible Dewatering Pump
  • Submersible Dewatering Pump
Ask For Price
X
Looking for “Submersible Pumps”?


Reach Us
Shashikant Paprunia (Proprietor)
No. 318, Gali No. 4, Govindpuri, Opposite Kalkaji Bus Depot Kalkaji
New Delhi- 110019, Delhi, India


Call Us

Send E-mail

Send SMS