Bds Engineering
Bds Engineering
Govindpuri, New Delhi, Delhi
SEND SMS
SEND EMAIL

Water Pressure Booster Pump

Manufacturer of a wide range of products which include peripheral booster pump, high pressure pump, jet booster pumps, peripheral booster pumps, jet booster pump and stainless steel multi-stage pumps.

Peripheral Booster Pump

Peripheral Booster Pump
  • Peripheral Booster Pump
Ask For Price
BLAIRS peripheral booster Pump is an equipment to achieve the right water pressure in a small domestic application. The automatic pressure systems are designed to automatically start and stop the pump on opening and closing of taps. pumps are able to offer high performance, consuming low power, reliable, economical, and simple to use which have particularly steady operating curves. For the correct functioning of the pump, use clean water. Pump is coupled with a Compact designed composed pump, a manometer, a Pressure diaphragm tank, a pressure adjustable switch, and a 3 or 5 ways connection in stamped brass. These pumps should be installed in a covered area, protected against the weather.

BLAIRS peripheral booster Pump AUTO SPIN is coupled with a ELECTRONIC FLOW SWITCH It makes the electric pump start when detecting a minimum fluid dropping movement into the pipe. AUTO SPIN Pumps shutdown suitably internally when the flow has been interrupted (taps closing or no water on suction side) from 10 to 180 seconds. It protects against the dry running, standard interval 60 min/4 attempts. No need of maintenance.

APPLICATIONS:

BLAIRS peripheral booster’s pumps are particularly suitable for domestic applications and for automatic distribution of water from surge tanks, watering gardens and to boosting the insufficient water pressure supply from wells, domestic Storage tanks, To lifting water and distribution in domestic fittings to increase the pressure in aqueducts & automatic water distribution by small and medium sized Pressure tanks or by hydrosphere units.

PERFORMANCE RANGE

  • Flow rate up to 50 I/min.(3.0m3/h)
  • Head up to 60 m

OPERATING LIMITS

  • Suction lift up to 8 m
  • Fluid temperature up to 60°C
  • Maximum ambient temperature 40°C
STRUCTURAL CHARACTERISTICS
  • Pump body Cast Iron
  • Motor Support Cast Iron
  • Impeller Brass
  • Shaft with rotor Stainless Steel
  • Mechanical seal Carbon/Ceramic
MOTOR
  • Built-in overload motor protector with automatic reset
  • Permanent split capacitor
  • Protection IP 44

Request
Callback
Yes! I am Interested
View PDF

High Pressure Pump

High Pressure Pump
  • High Pressure Pump
Ask For Price

Jet Booster Pump

Jet Booster Pump
  • Jet Booster Pump
Ask For Price
BLAIRS Jet booster Pump is an equipment to achieve the right water resource/pressure. The automatic pressure systems are designed to automatically start and stop the pump on opening and closing of taps. Pressure booster Pump is coupled with a Compact designed composed pump, a manometer, a Pressure diaphragm tank, a pressure adjustable switch, dry running protector and a 3 or 5 ways connection in stamped brass. These pumps should be installed in a covered area, protected against the weather. Self priming jet pump has a very high hydraulic performance and a considerable pressure capacity. They are very silent and reliable.

APPLICATIONS:
BLAIRS jet boosters are particularly suitable to increase pressure of water supply from wells, Storage tanks lifting and distribution in domestic fittings by small and medium sized Pressure tanks

PERFORMANCE RANGE
  • Flow rate up to 225 I/min.(13.5 m3/h)
  • Head up to 60 m
OPERATING LIMITS
  • Suction lift up to 9 m
  • Fluid temperature up to 60°C
  • Maximum ambient temperature 40°C
    Request
    Callback
    Yes! I am Interested
    View PDF

    Stainless Steel Multi-Stage Pumps

    Stainless Steel Multi-Stage Pumps
    • Stainless Steel Multi-Stage Pumps
    Ask For Price

    BLAIRS Stainless-steel Multistage booster Pump is an equipment to achieve the right water resource/pressure. The automatic pressure systems are designed to automatically start and stop the pump on opening and closing of taps. Pressure booster Pump is coupled with a Compact designed composed pump, a manometer, a Pressure diaphragm tank, a pressure adjustable switch, dry running protector and a 3 or 5 ways connection in stamped brass. These pumps should be installed in a covered area, protected against the weather. They are very silent and reliable.

    BLAIRS Stainless-steel Multistage pump is designed with advanced features such as the leakage-free design and fully stainless steel materials for rust-free operation without affecting your water quality. These pumps provide silent, strong & comfortable for water pressure all the time. They assure you the best water pumping performance for your applications, higher in efficiency and easy to operate Stainless-steel pumps. Featured with flat curves and construction in SS assures safe drinking water. Multistage design of the pump with high accuracy allows high head with lower motor capacity, which is ideally used for all highpressure applications. The most exceptional merit of these SS Pumps is that it's all wetted parts and casings including suction and delivery casing are made of
    stainless steel AISI 304 and 303.

    APPLICATIONS:

    Pumps are suitable for pumping water in Industries, Cooling systems, Aqua farming, Water treatment, Circulation of hot Water, Pumps on Water Treatment Plants, RO, DM Water Plants, Marine Water Handling, Fertilizing – metering & dosing applications.

    PERFORMANCE RANGE

    As the pumps are designed with flat curves any application using variable speed can be obtained to increase or decrease the flow of water by keeping head constant. The pumps have a max. Flow rate up to 60 M3/hr (1000 ltr/min) and Head max up to 230 M.

    OPERATING LIMITS

    The pumps are also designed to handle a temp between the ranges of 0º C to +110º C. pumps are designed with single mechanical seals which are very easy to interchange.

    STRUCTURAL CHARACTERISTICS

    • Pump body: Stainless steel
    • Pump body cover: Stainless steel
    • Motor Support: Stainless steel
    • Impeller: Stainless steel
    • Diffuser: Stainless steel
    • Pump flange: Stainless steel
    • Shaft with rotor: Stainless steel

    MOTOR

    • Built-in overload motor protector with automatic reset
    • Permanent split capacitor
    • Insulation Class F
    • Protection IP 54
    • Shaft with rotor Stainless Steel
    Request
    Callback
    Yes! I am Interested
    View PDF

    High Pressure Pumps

    High Pressure Pumps
    • High Pressure Pumps
    Ask For Price

    Jet Booster Pumps

    Ask For Price
    Yes! I am Interested

    Peripheral Booster Pumps

    Ask For Price
    Yes! I am Interested
    X
    Looking for “Water Pressure Booster Pump”?


    Reach Us
    Shashikant Paprunia (Proprietor)
    No. 318, Gali No. 4, Govindpuri, Opposite Kalkaji Bus Depot Kalkaji
    New Delhi- 110019, Delhi, India


    Call Us

    Send E-mail

    Send SMS